F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame

  • Sale
  • Rs. 1,378.00
  • Regular price Rs. 1,799.00
Tax included.


XYZ-45650                   HANDLING DAYS =5

 

QUICK OVERVIEW


Supported Receiver Input Signal: PPM, SBUS, DSM
Support PPM, SBUS, DSM receiver input signal
Battery voltage detection and buzzer interface
Run on SP RACING F3 EVO firmware 32 brush flight control
Large current NMOS transistors, operating current can reach 10A or higher
Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
Features :
UART1/2 Output: 5V
UART3 Output: 3.3V
Supported Receiver Input Signal: PPM, SBUS, DSM
Run on SP RACING F3 EVO firmware 32 brush flight control
Support 1S (4.2V) and 2S (8.4V) power supply, 2S power can bring a more violent flying experience
Independent design of the circuit structure, comes with pressure reduction technology, whether it is 1S or 2S power input, UART1/2 output 5V, UART3 output 3.3V
Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
Large current NMOS transistors, operating current can reach 10A or higher
Each machine is equipped with freewheeling diodes
Support PPM, SBUS, DSM receiver input signal
Battery voltage detection and buzzer interface
Compatible with almost all hollow cup motors, including 1020 coreless motor Notice: Before applying power, pay attention to the battery voltage selection. The default shipping is 1S (4.2V); 2S first need to disconnect the short contacts 1S, 2S and then connect two pads short. Prohibit the same three pads shorted together. Receiver configuration:
DSM DSM receiver soldered directly to the interface 3.3V, GND, RX3, CF the software configuration UART3.
PPM and SBUS receiver welded to the UART2 GND, + 5V, RX2 above, SBUS signal CF in the software configuration.


Package Includes :

1 x SP Racing F3 EVO Brush Flight Control.1 x Piece of Adhesive Tape.1 x Connecting Cable.