MPU-9250 QFN-24 9-axis Inertial Measurement Units IC

  • Sale
  • Rs. 549.00
  • Regular price Rs. 999.00
Tax included.

XYZ-162124                       HANDLING = 5 DAYS



MPU-9250 QFN-24 9-axis Inertial Measurement Units IC consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis Accelerometer. Hence, the MPU-9250 is a 9-axis motion tracking a device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU6515.


Gyroscope Features:
  1. Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable fullscale the range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADC
  2. Digitally-programmable low-pass filter
  3. Gyroscope operating current: 3.2mA
  4.  Sleep mode current: 8µA
  5. Factory calibrated sensitivity scale factor and Self-test.
Accelerometer Features
  1. Digital-output triple-axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g and
    ±16g and integrated 16-bit ADC
  2. Accelerometer normal operating current: 450µA
  3. Low power accelerometer mode current: 8.4µA at 0.98Hz, 19.8µA at 31.25Hz
  4. Sleep mode current: 8µA
  5. User-programmable interrupts
  6. Wake-on-motion interrupt for low power operation of applications processor and Self-test.
Magnetometer Features
  1. 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
  2. Wide dynamic measurement range and high resolution with lower current consumption.
  3. Output data resolution of 14 bit (0.6µT/LSB)
  4. Full-scale measurement range is ±4800µT
  5. Magnetometer normal operating current: 280µA at the 8Hz repetition rate
  6. Self-test function with the internal magnetic source to confirm magnetic sensor operation on end products.
Additional Features
  1. Auxiliary master I2C bus for reading data from external sensors (e.g. pressure sensor)
  2. 3.5mA operating current when all 9 motion sensing axes and the DMP are enabled
  3. VDD supply voltage range of 2.4 – 3.6V
  4. VDDIO reference voltage for auxiliary I2C devices
  5. Smallest and thinnest QFN package for portable devices: 3x3x1mm
  6. Minimal cross-axis sensitivity between the accelerometer, gyroscope and magnetometer axes
  7. 512 byte FIFO buffer enables the applications processor to read the data in bursts
  8. Digital-output temperature sensor
  9. User-programmable digital filters for gyroscope, accelerometer, and temp sensor10,000 g shock tolerant
  10. 400kHz Fast Mode I2C for communicating with all registers
  11. 1MHz SPI serial interface for communicating with all registers.

Package Includes: 

1 x MPU-9250 QFN-24 Inertial Measurement Units IC.