| STIRMCS-6611 | HANDLING = 5 DAYS | * MADE IN INDIA |
PRODUCT DESCRIPTION:
Features:
-
ARM based high speed controller design.
-
Alarm output on error.
-
Can be controlled by PLC, PC Software, Micro controller, SBC or any other device which can communicate with RTU.
-
Its also possible to operate without any controller using Onboard or external potentiometer, PWM, Pulse etc.
-
In Analog Speed Control mode Current, Speed and Acceleration can be set by using 3 potentiometers available on drive. Current setting range is 4A - 30A.
-
In Analog Speed Control mode direction can be changed by connecting F/R pin to COM pin of drive.
-
Over current, over voltage, under voltage protection.
-
In this drive torque output and speed is stable at high speed.
-
Up to 15 slaves is available through switch setting, upto 15 motors can be controlled using a single line.
-
When the power is turned on, the drive can start running motor automatically if enable is connected.
-
When break applied motor stops motion if it is running but it will not hold torque.